Surboard Build Diary

Shaping

May 2022, I purchased a “blank” from Sadhana surfboards in Christchurch. This is basically an oversized piece of foam built around a stringer. It needs cutting, shaping and sanding back to your intended surfboard shape. I went through some design options with Alex and we settled on a plan to build a “Performance Longboard” that would still allow me to “Hang Ten” on the off chance I don’t wipe out immediately.

Rough cuts, sanding and hoovering

surf_1

Smoothing out the imperfetions

surf_2

Action shot

surf_3

Shaping the rails

surf_3point5

Graphics

I named my board “Donna Sumner” — a playful nod to the queen of disco and my local surf break.

Donna Sumner Logo

surf_4

The board also has a Disco Ball graphic and photo of the Queen herself

surf_5

Glassing

Next up was the scary part, fibre glassing the boards! Alex had experience with shaping on his previous course, but glassing was new to us both. He had a horror story from the first attempt on his own board. Turns out for us amaterurs, it’s way easier as a two person job. Even so, you gotta be quick!

Donna Sumner getting ready for the treatment

surf_7

Alex’s board complete with funky fabric on the glassing table

surf_7point25

Donna Sumner drying up after the first pour

surf_7point5

Textured look after the resin had dried

surf_9

Alex decorating his board inbetween layers of resin

surf_9point5

Fin Boxes

Next up was to install the fin boxes. This required a router to cut out the resin and foam. The box is then mounted in place with a second pour.

Fin box holes routed out using a template

surf_10point5

How fin boxes should be mounted, with a second pour of resin

surf_10point25

Poor Alex made a whoopsey! 🤣

surf_6

Sanding and Polishing

Next up was much sanding and polishing! This work was insanely dusty, so had to be done outside.

Sanding in the sunshine

surf_10

Finished Boards

After many winter evenings work, our boards were finally complete! Such an awesome project resulting in something I’m super proud of and get to keep. Thanks Alex!

Donna Sumner nose graphics

surf_11

Donna Sumner in the shop

surf_12

Fin boxes the correct orientation this time

surf_13

Donna Sumner Logo

surf_14

Disco Ball Graphic

surf_15

Three DIY boards in a row

surf_16

Testing out the board on inside waves first

surf_17

Topside of Alex’s new board complete with funky fabric pattern

surf_18